Feature |
Benefit |
UltraSPARC T2 processor on a IBM BladeCenter
compatible blade
|
Capability to run Solaris 8 and 9 UltraSPARC applications
under Solaris 10 in a BladeCenter
environment.
Smooth migration to BladeCenter architecture for
UltraSPARC applications
|
Eight Cores in each UltraSPARC T2
processor
|
Eight processors cores with sixteen execution
units run up to four threads per execution unit,
with  "zero-cycle" thread switching.
Each core contains a fully pipelined floating
point unit.
Built-in cryptographic stream engine on each core.
|
Up to 32 GB Fully Buffered DDR II
memory
|
8 DIMM slots per blade
|
Runs existing Solaris 10 applications,
unmodified and Solaris 8/9 applications using Sun's
Migration Assistant
|
Faster migration to the BladeCenter architecture
No need to port existing Solaris 10 applications
to a  new architecture
|
Support for one internal 2.5 inch
SATA or SAS hard disk drive
|
Non-hot swap SATA or SAS drive provides up to
500  GBytes of local storage
|
Integrated dual Gigabit and 10 Gigabit
Ethernet controllers
|
Gigabit and 10 Gigabit provides fast network connections.
 (10 Gigabit requires optional
plug-in daughter card)
|
Two high-availability midplane connections
|
Each T2 Blade Server is connected via two redundant
 paths to the passive midplane and integrated  switching
and power infrastructure contained in the  BladeCenter
chassis
|
Integrated System Management Processors
|
Enables management via Sun Integrated Lights  Out
Management (ILOM) management
tools
Management processors increase server  availability
by continuously monitoring the server to  notify
of potential system failures or changes
|
Sun Integrated Lights Out Management
(ILOM) Management Tools
|
Enables management of T2 Blade Server via  standard
Sun tools
Allows T2 Blade Server to be integrated into a
 network of Sun Servers
|
|
|
Enables emulation of a Sun workstation
|
|
|
Sun Solaris 10
|
|
|
Extra communication channel
|